Now showing items 183-202 of 380

• H-Ti Thermodynamic description ﻿

(2013-03-29)
Previous thermodynamic assessments of the Ti–H system are reviewed, and a new evaluation is carried out by taking into account the liquid phase in the system using the associate solution model. The sublattice model is ...
• H; O; OH; O2; H2O ﻿

(2016-05-04)
abstract
• Heat Treating of Aluminum Alloys ﻿

(2013-12-03)
HEAT TREATING in its broadest sense, refers to any of the heating and cooling operations that are performed for the purpose of changing the mechanical properties, the metallurgical structure, or the residual stress state ...
• Hf-Ox First principles phase diagram calculations for the octahedral-interstitial system ﻿

(2013-04-03)
The group IV hexagonal closest packed (hcp) suboxides MOX (M = Ti, Zr or Hf) all exhibit octahedral interstitial ordering of oxygen, O, and vacancies, in solid solutions of the form View the MathML source, 0≤X≤1/2. By far, ...
• Hg–Ga-Mg Thermodynamic assessment of phase equilibria ﻿

(2013-03-29)
Phase relations in the Mg–Hg–Ga ternary system have been experimentally and thermodynamically studied. At first, the isothermal sections of the Mg–Hg–Ga system in the Mg-rich region at 673 K and 473 K were investigated by ...
• High strain rate data for Medium Mn 2 (10 Wt. % Mn) Steel ﻿

A General Motors Instron VHS 2-Column Servo-Hydraulic Test Unit with High Speed Stereo Digital Image Correlation for strain measurement and dual strain gauges for load measurement were used. Materials were tested at room ...
• The High Temperature Elastic Moduli of Aluminum ﻿

(1968-11-04)
Measurements of the elastic moduli of aluminum over the temperature range 300°–930°K are reported. These data together with those reported for T < 300°K, show that all elastic moduli, including the shear moduli, vary ...
• High-Strength Aluminum Powder Metallurgy Alloys ﻿

(2013-12-03)
This article describes and reviews the latter of these two areas of aluminum P/M technology where high strength and improved combinations of properties are obtained by exploiting the inherent advantages of P/M for alloy ...
• High-throughput Diffraction and Spectroscopic Data for Fe-Cr-Al Oxidation Studies ﻿

(2015-06-28)
The data set was used to evaluate a Fe-Cr-Al thin film samples in a narrow composition region centered on known bulk compositions. The data are composed of two individual studies. The first set of data is a low temperature ...

• Hydrostatic Extrusion of Metals and Alloys ﻿

(2013-12-03)
IN HYDROSTATIC EXTRUSION, the billet is extruded through a die via the action of a liquid pressure medium instead of the direct application of the load through a ram. In cases of hydrostatic extrusion, the billet is ...
• HYPERMESH ﻿

Altair HyperMesh is a high-performance finite element pre-processor to prepare even the largest models, starting from import of CAD geometry to exporting an analysis run for various disciplines. HyperMesh enables engineers ...
• Impact of solutes on the lattice parameters and elastic stiffness coefficients of hcp Fe from first-principles calculations ﻿

(2018-12-16)
The hexagonal close-packed (hcp) $\epsilon$-martensite phase in steels nucleates from the austenite parent phase during plastic straining and can be stabilized by solute additions. We compute the lattice parameters and ...
• In-Situ High-Throughput Synchrotron Diffraction Data of Multiple Principle Component Alloy Thin Films ﻿

(2016-08-05)
This data set is composed of a set of labeled synchrotron diffraction data taken at beamline 1-5 at SLAC on (Al1−x−yCuxMoy)FeNiTiVZr composition spread samples. The data were taken to test the relative importance of ...
• The Influence of Alloy Composition on Precipitates of the Al-Mg-Si System ﻿

(2013-12-03)
To study how changes in solute elements affect precipitation, six Al-Mg-Si alloys aged at 175 ° C were investigated by transmission electron microscopy (TEM). In alloys with 1.3 at. pct solute, when the Si/Mg ratio exceeds ...
• INFLUX Workshop ﻿

(2016-04-06)
INFLUX Workshop April 6, 2016 Conference Room – C103, Building 215 National Institute of Standards and Technology Gaithersburg, Maryland
• Initial Screening of Environmentally Sustainable Surface Pretreatments for Adhesive Bonding Applications ﻿

(2017)
A methacrylate adhesive marketed for high temperature applications was screened in combination with environmentally sustainable TT-C-490F surface pretreatments. Testing consisted of single-lap-joint testing using aluminum ...
• Interaction Between Oxygen Interstitials and Deformation Twins in alpha-Titanium ﻿

These data files provide input/output VASP and LAMMPS data along with spreadsheets containing data used to produce graphs in our above-reference article. The article abstract is: Twinning is an important deformation mechanism ...
• Interdiffusion in the Mg-Al System and Intrinsic Diffusion in beta-Mg2Al3 ﻿

(2013-05-07)
Solid-to-solid diffusion couples were assembled and annealed to examine the diffusion between pure Mg (99.96 pct) and Al (99.999 pct). Diffusion anneals were carried out at 573 K, 623 K and 673 K (300 C, 350 C and 400 C) ...
• Interdiffusion in the Ni-Re System: Evaluation of Uncertainties ﻿

(2017-06-22)
Diffusion couple experiments between Ni and Re at 1200 and 1350 °C were performed. These experiments established the limits of the two-phase FCC + HCP region. No intermediate phase was observed at these temperatures. ...