ASM Structural Materials Data Demonstration Project

NIST Repository

ASM Structural Materials Data Demonstration Project

 

This cooperative project, co-led by the NIST Materials Measurement Laboratory and ASM International, aims to create an open demonstration data repository for metallic structural materials that can be utilized by the materials community and to accelerate progress toward the digital data goals of the Materials Genome Initiative. Also participating in the project is Granta Design, Nexight Group and Kent State University.

Access to this Repository and its resources is limited to the SMDDP Developers Group and Pilot Group.

Collections in this community

Recent Submissions

  • Weaver, Jordan S.; Khosravani, Ali; Castillo, Andrew; Kalidindi, Surya R.
    Recent spherical microindentation stress-strain protocols were developed and validated on Al-6061 (DOI: 10.1186/s40192-016-0054-3). The scaling factor between the uniaxial yield strength and the indentation yield strength ...
  • Gurke, Sasha; Kaufman, J. Gilbert (2014-04-03)
    Spreadsheet with typical and minimum properties of wrought Al alloy 6061. Included fatigue, fracture and creep properties.
  • Rothman, S. J.; Peterson, N. L.; Nowick, L. J.; Robinson, L. C. (2014-02-16)
  • Demond, F. J.; Kalbitzer, S.; Mannsperger, H.; Damjantschitsch, H. (2014-02-10)
    By using ion implantation for preparation and p, γ-reactions for analysis of 30Si profiles the Si self-diffusion has been studied in the temperature range of 830–1200°C. The results reveal unambiguously that the diffusion ...
  • ASM International (2013-12-03)
    Ternary isothermal diagram ( 427°C), crystal data, melting points.
  • W.J. Kim; J.K. Kim; T.Y. Park; S.I. Hong; D.I. Kim M; Y.S. Kim; J.D. Lee (2013-12-03)
    Pre-equal-channel-angular-pressing (ECAP) solution treatment combined with post-ECAP aging treatment has been found to be effective in enhancing the room-temperature strength of 6061 aluminum alloy. The largest increase ...
  • A. Awadallah; J.J. Lewandowski (2013-12-03)
    DISCONTINUOUSLY REINFORCED aluminum (DRA) alloy metal-matrix composites (MMCs) represent an advanced aluminum materials concept whereby ceramic particles, or whiskers, are added to aluminum-base alloys through the use of ...
  • Barrie S. Shabel; Douglas A. Granger; William G. Truckner (2013-12-03)
    ALUMINUM-SILICON ALLOYS are noted for their unique combination of desirable characteristics, including excellent castability and low density combined with good mechanical properties. One reference to 6061.
  • G.W. Kuhlman (2013-12-03)
    ALUMINUM ALLOYS are forged into a variety of shapes and types of forgings with a broad range of final part forging design criteria based on the intended application. Aluminum alloy forgings, particularly closed-die forgings, ...
  • Cheng Xu; Terence G. Langdon (2013-12-03)
    Equal-channel angular pressing (ECAP) is an effective fabrication process for obtaining ultrafine-grained materials. This paper examines the development of homogeneity in materials processed by ECAP with emphasis on samples ...
  • U. G. Kang; H. J. Lee; W. J. Nam (2013-12-03)
    The ultrafine-grained Al 6061 alloy, which was fabricated by the combination of cryogenic rolling with warm rolling, achieved high ultimate tensile strength of 420 MPa. Compared with the results by other severe plastic ...
  • David J. Sypeck (2013-12-03)
    Wrought metallic sandwich structures with open cell truss cores are a relatively new class of multifunctional material systems that can be made using affordable deformation, assembly, and joining processes. Here, the design ...
  • Anodizing 
    Milton F. Stevenson, Jr. (2013-12-03)
    IN GENERAL, anodizing refers to conversion coating of the surface of aluminum and its alloys to porous aluminum oxide. The process derives its name from the fact that the aluminum part to be coated becomes the anode in an ...
  • Unknown author (2013-12-03)
    ALUMINUM OR ALUMINUM ALLOY products often have various types of finishes applied to their surfaces to enhance appearance or improve functional properties. This article discusses the methods employed in the cleaning, ...
  • Y. Austin Chang (2013-12-03)
    2003 Edward DeMille Campbell Memorial Lecture ASM International presents an overview, undoubtedly a personal one, on the impact of Phase Diagram Calculations on Teaching, Research and Industrial 12 instances of 6061.
  • P. Lang; A. Falahati; M.R. Ahmadi; P. Warczok; E. Povoden-Karadeniz; E. Kozeschnik; R. Radis (2013-12-03)
    The present study aims at understanding the process of age hardening in Al-Mg-Si (Cu) alloys, which starts immediately after annealing heat treatment followed by quenching. The cooling rate turns out to be one of the most ...
  • R. E. Pawel; G. L. Yoder; D. K. Felde; B. H. Montgomery; M. T. McFee (2013-12-03)
    The corrosion of aluminum alloy fuel cladding in ultrahigh flux research reactors such as the Advanced Neutron Source may pose special temperature and structural problems associated with the buildup of reaction products ...
  • John V. Foltz; Charles M. Blackmon (2013-12-03)
    METAL-MATRIX COMPOSITES (MMCs) are a class of materials with potential for a wide variety of structural and thermal management applications. Metal-matrix composites are capable of providing higher-temperature operating ...
  • N. I. Kolobnev; L. B. Ber; L. B. Khokhlatova; D. K. Ryabov (2013-12-03)
    A brief review of the reports of ICAA12 devoted to high-technology weldable alloys of the Al _ Si _ Mg systemis presented. Five occurrences of 6061.
  • J. Buha; R.N. Lumley; A.G. Crosky (2013-12-03)
    The effects of a recently developed interrupted aging procedure on the microstructural development and mechanical properties of the commercial Al-Mg-Si-Cu alloy 6061 have been studied using transmission electron microscopy ...

View more