Browsing Experimental Data Repository by Title
Now showing items 36-55 of 64
-
Multivariate Analysis of High Through-Put Adhesively Bonded Single Lap Joints: Experimental and Work Flow Protocols - Load vs. displacement data
(2016-03-24)Raw and analyzed load versus displacement data, including semi-automated routines for maximum strength, displacement, and area under the curve -
Multivariate Analysis of High Through-Put Adhesively Bonded Single Lap Joints: Experimental and Work Flow Protocols - Supplementary data
(2016-03-24)Supporting technical data sheets, MSDS, surface pretreatment and bonding processes, travel sheets, and mode-of-failure surveys -
Multivariate Analysis of High Through-Put Adhesively Bonded Single Lap Joints: Experimental and Work Flow Protocols – Constitutive mechanical properties
(2018-05-31)Tensile stress-strain mechanical test results and analysis for the adhesives and aluminum adherend. -
Multivariate Analysis of High Through-Put Adhesively Bonded Single Lap Joints: Experimental and Workflow Protocols - Full report
(2016-06-07)An adhesively bonded single lap joint was used to study the effects of coupon thickness, bondline thickness, surface preparation, presence of an overflow fillet, and adhesive type. Gains in the Education of Mathematics and ... -
Nature of Long-Range Order in Cu3+xAu1-x
(2003-11-17)The diffuse scattering and intensities of Bragg peaks from single crystals of Cu77Au23 and Cu78Au22 have been studied for various degrees of long‐range order. The results indicate that the excess Cu atoms, replacing Au in ... -
Ni Self-Diffusion
(2013-06-26)Self-diffusion in nickel single crystals is measured between 813 and 1193 K using ion-beam sputtering as a microsectioning technique. Gaussian activity-depth profiles are observed over about three orders of magnitude in ... -
On the Anomalous Self-Diffusion in B.C.C. Titanium
(2013-07-03)Self-diffusion of the Ti44 is measured in Beta-Titanium under UHV conditions int eh whole range of existence of the bcc phase. The Arrhenius plot shows a strong upward curvature in agreement with previous investigations ... -
Phase equilibria and thermodynamic calculation of the CoeTa binary system
(2014-09-29)Experimental investigation and thermodynamic evaluation of the CoeTa binary phase diagram was carried out. Equilibrium compositions obtained in two-phase alloys and diffusion couples were measured by electron probe ... -
Raw and Processed Data to Generate Three-Dimensional Grain Map of Open-Cell Aluminum Foam
(2018-08-03)A three-dimensional grain map of an investment-cast, open-cell, aluminum foam is generated using a combination of experimentally derived and synthetically derived data. Specifically, the experimental data are derived from ... -
The Relation Between Bulk Modulus and Relative Enthalpy: a Broad-Based Thermodynamic Analysis and a Case Study on Aluminum
(2001-07-17)By postulating a linear relationship between logarithmic bulk modulus and relative enthalpy, we have developed in this paper a thermodynamic framework that provides a link between thermal properties and bulk modulus under ... -
Self-Diffusion and fast cobalt impurity diffusion in the bulk and in grain boundaries of hexagonal titanium
(2013-07-03)Bulk Self-Diffusion was measure in alpha-Titanium single crystals between 776 and 1132 K using the radiotracer Ti44 and ion beam sputtering for profile sectioning. -
Self-diffusion in aluminum at low temperatures
(2014-01-20)Values of the self-diffusivity of pure aluminum in the temperature range 130∮ to 200° have been determined by measuring the rate of annealing of prismatic and faulted dislocation loops in thin foils of quenched 99.999 pct ... -
Self-Diffusion in Solid Chromium
(2013-07-08) -
Single-Lap-Joint Screening of Hysol EA 9309NA Epoxy Adhesive
A commercial 2-part epoxy was evaluated per ARL-ADHES-QA-001.00 rev 1.0, which consists of single-lap-joint testing at room temperature and subsequent hot/wet and elevated temperature conditioning. This testing protocol ... -
Spherical nanoindentation stress-strain curves of commercially pure titanium and Ti-6Al-4V
Spherical nanoindentation combined with electron back-scattered diffraction was employed to characterize the grain-scale elastic and plastic anisotropy of single crystal alpha-Ti for commercially pure (CP-Ti) and alloyed ... -
Spherical nanoindentation stress-strain curves of primary-α grains in Ti5-2.5, Ti811, Ti64, Ti6242 and Ti6246 alloys
Recently established spherical indentation stress-strain protocols have demonstrated the feasibility of measuring reliably the mechanical responses at different material structure length scales in a broad range of structural ... -
Study of Si self-diffusion by nuclear techniques
(2014-02-10)By using ion implantation for preparation and p, γ-reactions for analysis of 30Si profiles the Si self-diffusion has been studied in the temperature range of 830–1200°C. The results reveal unambiguously that the diffusion ... -
Synchrotron Diffraction and Composition Data Sets of Co-Fe-Zr Metallic Glasses
(2017-07-12)The dataset summarizes a series of high-throughput studies on the Co-Fe-Zr metallic glass system with a total of 1323 unique alloys having been investigated. The primary goal of the work was to identify unsupervised ...