Experimental Data Repository
Browse by
Sub-communities within this community
-
Mechanical Properties
Experimental data describing various mechanical properties
Collections in this community
Recent Submissions
-
Use of spherical nanoindentation protocols to study the anisotropic mechanical response of alpha-beta single colonies in Ti-6Al-4V alloy
The recently developed spherical nanoindentation stress-strain protocols were employed in this study to investigate systematically the anisotropic elastic and yield response of the α-β single colonies in a Ti-6Al-4V alloy. ... -
HMX microstructural data of beta, delta, and beta-reversion
X-ray computed tomography of large HMX crystals, and scanning electron microscopy of focused ion beam milled/polished small HMX crystals of varying solid phases. -
Spherical nanoindentation stress-strain curves of primary-α grains in Ti5-2.5, Ti811, Ti64, Ti6242 and Ti6246 alloys
Recently established spherical indentation stress-strain protocols have demonstrated the feasibility of measuring reliably the mechanical responses at different material structure length scales in a broad range of structural ... -
Synthetic X-ray Microtomographic Image Data of Fiber-reinforced Composites
(2019)A new algorithm was developed to segment three-dimensional fibers in multi-directional fiber-reinforced composites (FRCs) imaged using X-ray microtomography (µCT). Validation of the algorithm was performed using synthetic ... -
Materials Informatics Approach to Material Extrusion Additive Manufacturing
Processing-structure-property relationships in material extrusion additive manufacturing are complex, non-linear, and poorly understood. In this work, we designed an informatics workflow for the collection of high pedigree ... -
Raw and Processed Data to Generate Three-Dimensional Grain Map of Open-Cell Aluminum Foam
(2018-08-03)A three-dimensional grain map of an investment-cast, open-cell, aluminum foam is generated using a combination of experimentally derived and synthetically derived data. Specifically, the experimental data are derived from ... -
Multivariate Analysis of High Through-Put Adhesively Bonded Single Lap Joints: Experimental and Work Flow Protocols – Constitutive mechanical properties
(2018-05-31)Tensile stress-strain mechanical test results and analysis for the adhesives and aluminum adherend. -
Ultrahigh Carbon Steel Microconstituent Annotations
(2018-05-04)This dataset consists of scanning electron micrographs accompanied by microconstituent annotations, and is intended as a community benchmark dataset for microstructure segmentation and clustering tasks. The dataset consists ... -
Synchrotron Diffraction and Composition Data Sets of Co-Fe-Zr Metallic Glasses
(2017-07-12)The dataset summarizes a series of high-throughput studies on the Co-Fe-Zr metallic glass system with a total of 1323 unique alloys having been investigated. The primary goal of the work was to identify unsupervised ... -
Single-Lap-Joint Screening of Hysol EA 9309NA Epoxy Adhesive
A commercial 2-part epoxy was evaluated per ARL-ADHES-QA-001.00 rev 1.0, which consists of single-lap-joint testing at room temperature and subsequent hot/wet and elevated temperature conditioning. This testing protocol ... -
Initial Screening of Environmentally Sustainable Surface Pretreatments for Adhesive Bonding Applications
(2017)A methacrylate adhesive marketed for high temperature applications was screened in combination with environmentally sustainable TT-C-490F surface pretreatments. Testing consisted of single-lap-joint testing using aluminum ... -
High-throughput Diffraction and Spectroscopic Data for Fe-Cr-Al Oxidation Studies
(2015-06-28)The data set was used to evaluate a Fe-Cr-Al thin film samples in a narrow composition region centered on known bulk compositions. The data are composed of two individual studies. The first set of data is a low temperature ... -
In-Situ High-Throughput Synchrotron Diffraction Data of Multiple Principle Component Alloy Thin Films
(2016-08-05)This data set is composed of a set of labeled synchrotron diffraction data taken at beamline 1-5 at SLAC on (Al1−x−yCuxMoy)FeNiTiVZr composition spread samples. The data were taken to test the relative importance of ... -
Co-(Ni)-Al-W alloy DSC measured temperatures: Curie, solvus, solidus, and liquidus temperatures
Co-(Ni)-Al-W Ternary and Quaternary DSC measured Curie, solvus, solidus, and liquidus temperatures. -
Spherical nanoindentation stress-strain curves of commercially pure titanium and Ti-6Al-4V
Spherical nanoindentation combined with electron back-scattered diffraction was employed to characterize the grain-scale elastic and plastic anisotropy of single crystal alpha-Ti for commercially pure (CP-Ti) and alloyed ... -
GaN nanowire image acquired by near-field scanning microwave microscopy
(2016-07-27)I have posted ascii file versions of image files corresponding to near-field scanning microwave microscopy (NSSM) images of a GaN nanowire. One image (fig5a.txt) corresponds to the raw image which is shown in Figure 5a ... -
Co-Al-W Diffusion Mobilities
(2016-04)Diffusion couple experiments between various Co-rich face centered cubic (FCC) alloys in the Co-W-Al ternary system have been conducted at 900 °C and 1000 °C. Diffusion coefficients have been extracted for the Co-W binary ... -
Multivariate Analysis of High Through-Put Adhesively Bonded Single Lap Joints: Experimental and Workflow Protocols - Full report
(2016-06-07)An adhesively bonded single lap joint was used to study the effects of coupon thickness, bondline thickness, surface preparation, presence of an overflow fillet, and adhesive type. Gains in the Education of Mathematics and ...