On the basis of the critically reviewed experimental diffusivities available in the literature, the atomic mobilities of Cu, Mn and Ni in fcc Cu–Mn–Ni alloys were assessed as a function of temperature and composition by ...

The isothermal section of the Cu–Si–Zn ternary system at 600 °C was experimentally determined with fifteen alloys by means of optical microscopy, X-ray diffraction, and the scanning electron microscopy with energy dispersive ...

Based on the critical evaluation of the experimental data available in the literature, the isothermal section of the Fe–Si–Zn system at 873 K was measured using a combination of X-ray analysis and scanning electron microscopy ...

The isothermal section at 327 °C for the Mg–Si–Zn system has been determined by means of X-ray diffraction (XRD) and scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM/EDX). No ternary compound has ...

The V–Zn system was investigated by a combination of CALPHAD modeling with key experiments and first-principles calculations. Based on a critical literature review, one diffusion couple and nine alloys were designed to ...

Using solid/solid diffusion couples and the electron probe microanalysis (EPMA) technique, the interdiffusion coefficients in fcc Cu–Al–Fe alloys at 1273 K were determined by means of Whittle and Green’s method. Based on ...

The Mn–Ni–Si system has been investigated via thermodynamic modeling coupled with key experiments. The isothermal section at 1000 °C of the Mn–Ni–Si system was determined by means of XRD and SEM/EDX. Based on the critically ...