Search
Now showing items 11-20 of 41
Al-Cr-Ti Assessment of diffusion mobility for the bcc phase
(2013-04-01)
Experimental diffusion data in the literature were critically assessed to develop the diffusion mobility for the bcc phase of the Ti–Al–Cr system by means of a DICTRA-type (Diffusion Controlled Transformation) diffusion ...
Cu-Sn-Ti Experimental investigation and thermodynamic assessment
(2013-03-29)
The Cu–Sn–Ti ternary system has been studied via experiments and thermodynamic modelling. In the experimental section, the composition of the alloys was selected based on the preliminary calculations and available literature ...
Al-Cr-Ti–V Thermodynamic assessment of the ordered B2 phase
(2013-03-29)
Thermodynamic assessment of the ordered B2 phase in the quaternary Ti–V–Cr–Al system is carried out. A set of self-consistent thermodynamic parameters is presented. A two-sublattice model (Al,Cr,Ti,V )0.5: (Al,Cr,Ti,V )0.5 ...
Cs–In Thermodynamic Modeling
(2013-03-28)
Thermodynamic description of the Cs–In system has been developed by the CALPHAD modeling combined with first-principles calculations. The calculated phase diagram of the Cs–In system is compared with the experimental one ...
V-Zn Experimental results and thermodynamic assessment
(2013-04-01)
Experimental investigation followed by thermodynamic assessment of the V–Zn system was carried out in the present study. A series of V–Zn alloys annealed at various temperatures were examined using scanning electron ...
Bi–Lu and Lu–Sb Thermodynamic assessments
(2013-04-01)
The phase diagrams and thermodynamic properties in the Bi–Lu and Lu–Sb binary systems have been assessed by using the CALPHAD (Calculation of Phase Diagrams) method on the basis of experimental data including the thermodynamic ...
Cr–Ge Thermodynamic description
(2013-03-28)
he Cr–Ge binary system was thermodynamically optimized using the CALPHAD method. The liquid phase was described by means of an associate solution model. The BCC terminal solid solution was described by the substitutional ...
Cu–Pb–Zn Thermodynamic description
(2013-03-29)
Thermodynamic description of the ternary Cu–Pb–Zn system is presented. The adjustable parameters of the sub-systems, Cu–Pb, Cu–Zn and Pb–Zn, are taken from earlier SGTE-based assessments and those of the ternary system are ...
Li–O Thermodynamic assessment
(2013-03-30)
The Li–O system has been investigated by means of the CALPHAD approach. The phase equilibria and thermodynamic data of this system are critically reviewed and assessed. The liquid phase and two stable lithium oxides, Li2O ...
Au–Ga Thermodynamic assessment
(2013-03-29)
The Au–Ga binary system was assessed thermodynamically using the CALPHAD method through Thermo-calc® software based on the critical review of the available experimental data from the published literature. The solution ...