ASM Structural Materials Data Demonstration Project: Recent submissions
Now showing items 21-40 of 80
-
Metal-Matrix Composites
(2013-12-03)METAL-MATRIX COMPOSITES (MMCs) are a class of materials with potential for a wide variety of structural and thermal management applications. Metal-matrix composites are capable of providing higher-temperature operating ... -
Structure, Properties and Application of Alloys of the Al _ Mg _ Si _ (Cu) System
(2013-12-03)A brief review of the reports of ICAA12 devoted to high-technology weldable alloys of the Al _ Si _ Mg systemis presented. Five occurrences of 6061. -
The Influence of Alloy Composition on Precipitates of the Al-Mg-Si System
(2013-12-03)To study how changes in solute elements affect precipitation, six Al-Mg-Si alloys aged at 175 ° C were investigated by transmission electron microscopy (TEM). In alloys with 1.3 at. pct solute, when the Si/Mg ratio exceeds ... -
Superplastic behavior and cavitation in high-strain-rate superplastic Si3N4p /Al-Mg-Si composites,
(2013-12-03)High-strain-rate superplastic behavior has been investigated for Si3N4p/Al-Mg-Si (6061) composites with a V f=20 and 30 pct, respectively, where V f is the volume fraction of reinforcements. A maximum elongation was attained ... -
Experimental analysis and thermodynamic calculation of the structural regularities in the fusion diagram of the system of alloys Al-Mg-Si,
(2013-12-03)Sections of the phase diagram Al-Mg-Si with up to 35 at.% magnesium and 35 at.% silicon are constructed. The thermodynamic calculation and experimental analysis have shown that the conode of three-phase eutectic equilibrium ... -
Recrystallization of an AlMgSi alloy after different modes of hot deformation
(2013-12-03)Recrystallization of an AlMgSi alloy has been studied after deformation in torsion and plane strain compression. The main emphasis has been focused on describing the development of nuclei in shear deformed material, and a ... -
Comparison of experimental, calculated and observed values for electrical and thermal conductivity of aluminium alloys
(2013-12-03)A model has been developed for calculating the electrical resistivity of commercial aluminium alloys from composition and heat treatments using the Matthiessen rule. The model is based on the approximation that the solubility ... -
High-Strength Aluminum Powder Metallurgy Alloys
(2013-12-03)This article describes and reviews the latter of these two areas of aluminum P/M technology where high strength and improved combinations of properties are obtained by exploiting the inherent advantages of P/M for alloy ... -
Machining of Al
(2013-12-03) -
Synthesis and Processing of MMC
(2013-12-03) -
Chromate Conversion Coatings
(2013-12-03) -
Theory and Application of Time-Temperature Parameters
(2013-12-03) -
Mechanical Properties p162-169
(2013-12-03) -
Surface Engineering of Specialty Steels
(2013-12-03) -
Advanced Aluminum Powder Metallurgy Alloys and Composites
(2013-12-03)POWDER METALLURGICAL PROCESSING provides much finer and homogeneous microstructure, better mechanical properties, and near-net shape parts producibility for aluminum alloys in comparison with ingot metallurgy (I/M). In ... -
Conventional Aluminum Powder Metallurgy Alloys
(2013-12-03)P/M technology can be used to refine microstructures compared with those made by conventional ingot metallurgy (I/M), which often results in improved mechanical and corrosion properties. Microstructural refinement by P/M ... -
Bulk Properties of Powders
(2013-12-03)THE P/M INDUSTRY has grown considerably in the past decade. As a result of this growth, more critical components in the automotive, aircraft, tooling, and industrial equipment industries are being considered for manufacture ... -
Microstructure of Alloys
(2013-12-03)The examination of microstructure is one of the principal means of evaluating alloys and products to determine the effects of various fabrication and thermal treatments, evaluate the effects of new procedures, and analyze ... -
Aluminum Foundry Products
(2013-12-03)ALUMINUM CASTING ALLOYS are the most versatile of all common foundry alloys and generally have the highest castability ratings. As casting materials, aluminum alloys have the following favorable characteristics: Good ... -
Metallurgy of Heat Treatment and General Principles of Precipitation
(2013-12-03)The heat treatable alloys contain amounts of soluble alloying elements that exceed the equilibrium solid solubility limit at room and moderately higher temperatures. The amount present may be less or more than the maximum ...