Search
Now showing items 11-19 of 19
Cu–Pb–Zn Thermodynamic description
(2013-03-29)
Thermodynamic description of the ternary Cu–Pb–Zn system is presented. The adjustable parameters of the sub-systems, Cu–Pb, Cu–Zn and Pb–Zn, are taken from earlier SGTE-based assessments and those of the ternary system are ...
C-Mn Thermodynamic assessment
(2013-03-29)
The manganese–carbon system has been assessed by means of the CALPHAD method. There is a previous description of this system [W. Huang, Scand. J. Metall., 19 (1990) 26–32], but since then a number of high quality experimental ...
Li–O Thermodynamic assessment
(2013-03-30)
The Li–O system has been investigated by means of the CALPHAD approach. The phase equilibria and thermodynamic data of this system are critically reviewed and assessed. The liquid phase and two stable lithium oxides, Li2O ...
Ag-Al Functional Description
(2013-01-31)
The energy expressions for GP zones in the Al–Ag binary system, including the ε-state and the η-state ones, are established by combining the essential Gibbs energy for the matrix alloy with the interfacial energy and the ...
Cr-Re Ab initio and thermodynamic study
(2013-03-29)
In this work the assessment of the Cr–Re system, using a combined ab initio and CALPHAD (CALculation of Phase Diagrams) approach, is presented. To model the sigma phase, a five-sublattice combined CEF model was applied and ...
Mg–Si–Zn Experimental investigation and thermodynamic modeling
(2013-03-30)
The isothermal section at 327 °C for the Mg–Si–Zn system has been determined by means of X-ray diffraction (XRD) and scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM/EDX). No ternary compound has ...
Mg–Nd, Mg–Zn, and Mg–Nd–Zn Thermodynamic description on the miscibility gap
(2013-03-29)
With the consideration of the existence of the metastable miscibility gaps, the thermodynamic parameters of the Mg-based solid solution have been assessed for the Mg–Zn and Mg–Nd systems. The new semi-empirical equation ...
Mn-Ni-Si
(2013-04-01)
The Mn–Ni–Si system has been investigated via thermodynamic modeling coupled with key experiments. The isothermal section at 1000 °C of the Mn–Ni–Si system was determined by means of XRD and SEM/EDX. Based on the critically ...
Al-Cu-Y Thermodynamic description
(2013-04-01)
Phase equilibria in the ternary Al–Cu–Y system have been analyzed by coupling the CALPHAD method and first-principles calculations, and a complete thermodynamic description was obtained. The thermodynamic descriptions of ...