Now showing items 1-10 of 11
Examination of Ni-base superalloy diffusion couples containing multiphase regions
Four Ni-base superalloy diffusion couples with multiphase regions were studied. The diffusion couples contained single-phase (gamma ), two phase( gamma +MC carbide) and three-phase ( gamma + gamma prime+MC carbide) ...
Measurement of Equilibrium Concentrations of Vacancies in Copper
The net added fraction of thermally-generated atomic sites, ΔNN, has been measured, during equilibrium heating to near the melting point, in a coarse-grained copper bar of 99.999% purity. The linear thermal expansion, ΔLL, ...
Multivariate Analysis of High Through-Put Adhesively Bonded Single Lap Joints: Experimental and Work Flow Protocols - Analysis results
Formatted categorical and numerical variables for multivariate analysis
Temperature Dependece of the Elastic Constants of Aluminum
The single crystal elastic constants of aluminum have been measured using a piezoelectric composite oscillator from room temperature to just 20K below the melting point. The elastic moduli differ markedly from previous ...
Temperature Variation of the Elastic Constants of Cubic Elements. I. Copper
The ultrasonic pulse technique has been used in conjunction with a specially devised cryogenic technique to measure the velocities of 10-Mc/sec acoustic waves in copper single crystals in the range from 4.2°K to 300°K. The ...
The composite piezoelectric oscillator is employed to measure the adiabatic elastic moduli of crystalline aluminum over the temperature interval 63°K to 773°K.
The composite piezoelectric oscillator is employed to measure the adiabatic elastic moduli of crystalline aluminum over the temperature interval 63'K to 773 K. The data permit a valid extrapolation to O'K. The Debye ...
Study of Si self-diffusion by nuclear techniques
By using ion implantation for preparation and p, γ-reactions for analysis of 30Si profiles the Si self-diffusion has been studied in the temperature range of 830–1200°C. The results reveal unambiguously that the diffusion ...
Multivariate Analysis of High Through-Put Adhesively Bonded Single Lap Joints: Experimental and Work Flow Protocols - Failure surface images
Mode-of-failure images and surveys, 300 dots per inch (dpi) resolution, Tagged Image File Format (TIFF)
Multivariate Analysis of High Through-Put Adhesively Bonded Single Lap Joints: Experimental and Work Flow Protocols - Load vs. displacement data
Raw and analyzed load versus displacement data, including semi-automated routines for maximum strength, displacement, and area under the curve