Now showing items 1-5 of 5

    • C-Mn Thermodynamic assessment 

      Appen, J.; Djurovic, D.; Drownskowski, R.; Hallstedt, B. (2013-03-29)
      The manganese–carbon system has been assessed by means of the CALPHAD method. There is a previous description of this system [W. Huang, Scand. J. Metall., 19 (1990) 26–32], but since then a number of high quality experimental ...
    • Cu–Si–Zn and Cu–Zn Experimental investigation and thermodynamic modeling 

      Du, Y.; Liu, Shuhong; Liu, Z.-K.; Shang, S.-L.; Wang, Jiang; Wang, Peisheng; Xu, Honghui; Zhang, L.; Zhang, Weiqing (2013-03-30)
      The isothermal section of the Cu–Si–Zn ternary system at 600 °C was experimentally determined with fifteen alloys by means of optical microscopy, X-ray diffraction, and the scanning electron microscopy with energy dispersive ...
    • Mg–Si–Zn Experimental investigation and thermodynamic modeling 

      Du, Y.; Liu, Shuhong; Wang, Man; Wang, Peisheng; Xu, Honghui; Zhang, Weiqing (2013-03-30)
      The isothermal section at 327 °C for the Mg–Si–Zn system has been determined by means of X-ray diffraction (XRD) and scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM/EDX). No ternary compound has ...
    • Mn-Nb-Si Thermodynamic assessment 

      Du, Zhenmin; Geng, T.; Guo, Cuiping; Li, Changrong; Xu, H.B.; Zhao, X. (2013-03-29)
      Based on the experimental isothermal sections at 800, 1000, 1700 and 1800 °C and the liquidus projections from both the literature and the present measurements, the ternary Nb–Si–Mo system is thermodynamically assessed ...
    • Si-Sr thermodynamic reassessment 

      Du, Yong; Li, Kai; Liu, Shuhong; Sha, C. (2013-04-01)
      The Si–Sr binary system has been thermodynamically reassessed in the present work based on the critically reviewed experimental data available in the literature, especially newly published experimental phase diagram data ...