Search
Now showing items 21-30 of 47
Cu–Pb–Zn Thermodynamic description
(2013-03-29)
Thermodynamic description of the ternary Cu–Pb–Zn system is presented. The adjustable parameters of the sub-systems, Cu–Pb, Cu–Zn and Pb–Zn, are taken from earlier SGTE-based assessments and those of the ternary system are ...
C-Mn Thermodynamic assessment
(2013-03-29)
The manganese–carbon system has been assessed by means of the CALPHAD method. There is a previous description of this system [W. Huang, Scand. J. Metall., 19 (1990) 26–32], but since then a number of high quality experimental ...
Li–O Thermodynamic assessment
(2013-03-30)
The Li–O system has been investigated by means of the CALPHAD approach. The phase equilibria and thermodynamic data of this system are critically reviewed and assessed. The liquid phase and two stable lithium oxides, Li2O ...
Ag–Cd and Ag–Sn diffusion and atomic mobilities
(2013-07-08)
Diffusion in Ag-based solders is a practical topic that has attracted world-wide attention. With the available experimental data in the literature, the atomic mobilities of Ag, Cd and Sn in fcc Ag–Cd and Ag–Sn alloys are ...
Au–Ga Thermodynamic assessment
(2013-03-29)
The Au–Ga binary system was assessed thermodynamically using the CALPHAD method through Thermo-calc® software based on the critical review of the available experimental data from the published literature. The solution ...
Ag-Al Functional Description
(2013-01-31)
The energy expressions for GP zones in the Al–Ag binary system, including the ε-state and the η-state ones, are established by combining the essential Gibbs energy for the matrix alloy with the interfacial energy and the ...
Cr-Re Ab initio and thermodynamic study
(2013-03-29)
In this work the assessment of the Cr–Re system, using a combined ab initio and CALPHAD (CALculation of Phase Diagrams) approach, is presented. To model the sigma phase, a five-sublattice combined CEF model was applied and ...
Pd–S Thermodynamic modeling
(2013-03-29)
Sulfur poisoning of PdCu membrane alloys has promoted new alloy development that requires quantitative understanding of the thermodynamics of the Pd–Cu–S system. This study attempts to develop a self-consistent thermodynamic ...
Mg–Si–Zn Experimental investigation and thermodynamic modeling
(2013-03-30)
The isothermal section at 327 °C for the Mg–Si–Zn system has been determined by means of X-ray diffraction (XRD) and scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM/EDX). No ternary compound has ...
Ta-V Thermodynamic modeling of Laves phases
(2013-03-29)
The Ta–V system is an interesting system exhibiting the existence of Laves phases among elements of the same group in the periodic system, and with an unusual order of stability of Laves phase structures at 0 K. Whereas ...