Search
Now showing items 71-80 of 80
Forging and Hot Pressing
(2013-12-03)
POWDER FORGING AND HOT PRESSING processes are similar in terms of their external physical characteristics. Each process involves the simultaneous application of pressure and heat to consolidate powders to full, or nearly ...
Mechanical Properties p162-169
(2013-12-03)
Metastable Phases in an Al-Mg-Si Alloy Containing Copper
(2013-12-03)
Alloy studied a lab sample with 0.5pct Cu mass content. The Q’phase in an Al-1.0 mass pct Mg2Si-0.5 mass pct Cu alloy at a peak-aged condition of 523 K was observed by a high-resolution transmission electron microscope ...
The development of hardness homogeneity in aluminum and an aluminum alloy processed by ECAP
(2013-12-03)
Equal-channel angular pressing (ECAP) is an effective fabrication process for obtaining ultrafine-grained materials. This paper examines the development of homogeneity in materials processed by ECAP with emphasis on samples ...
The corrosion of 6061 aluminum under heat transfer conditions in the ANS corrosion test loop,
(2013-12-03)
The corrosion of aluminum alloy fuel cladding in ultrahigh flux research reactors such as the Advanced Neutron Source may pose special temperature and structural problems associated with the buildup of reaction products ...
Metal-Matrix Composites
(2013-12-03)
METAL-MATRIX COMPOSITES (MMCs) are a class of materials with potential for a wide variety of structural and thermal management applications. Metal-matrix composites are capable of providing higher-temperature operating ...
Wrought aluminum truss core sandwich structures
(2013-12-03)
Wrought metallic sandwich structures with open cell truss cores are a relatively new class of multifunctional material systems that can be made using affordable deformation, assembly, and joining processes. Here, the design ...
Structure, Properties and Application of Alloys of the Al _ Mg _ Si _ (Cu) System
(2013-12-03)
A brief review of the reports of ICAA12 devoted to high-technology weldable alloys of the Al _ Si _ Mg systemis presented. Five occurrences of 6061.
Tensile and Microindentation Stress-Strain Curves of Al-6061
Recent spherical microindentation stress-strain protocols were developed and validated on Al-6061 (DOI: 10.1186/s40192-016-0054-3). The scaling factor between the uniaxial yield strength and the indentation yield strength ...