Browsing CALPHAD Assessments by Subject "File Repository Categories::Phases::Disordered::FCC_A1"

Now showing items 1-20 of 30

    • Ag-Al Functional Description 

      Du, Zeting; Jing, Zhan-Peng; Li, Changrong; Niu, Chunji (2013-01-31)
      The energy expressions for GP zones in the Al–Ag binary system, including the ε-state and the η-state ones, are established by combining the essential Gibbs energy for the matrix alloy with the interfacial energy and the ...

    • Ag-Au-Cu Atomic mobilities and diffusion characteristics 

      Du, Y.; Liang, D.; Liu, Yajun; Sheng, G.; Wang, Jiang; Zhang, L. (2013-04-01)
      CALPHAD kinetics has evolved to be a well-established discipline, which allows complex non-equilibrium processes to be fully explored. Such a success relies on the use of Redlich–Kister polynomials to describe atomic ...

    • Ag–Cd and Ag–Sn diffusion and atomic mobilities 

      Du, Y.; Liu, Y.; Sheng, G.; Wang, J.; Zhang, L. (2013-07-08)
      Diffusion in Ag-based solders is a practical topic that has attracted world-wide attention. With the available experimental data in the literature, the atomic mobilities of Ag, Cd and Sn in fcc Ag–Cd and Ag–Sn alloys are ...

    • Ag–Zn diffusional mobilities 

      Liu, X.J.; Shangguan, N.; Wang, C.P. (2013-03-30)
      Based on the available thermodynamic information and diffusion coefficient data of the Ag–Zn binary system, the atomic mobilities of Ag and Zn in face-centred cubic (fcc) Ag–Zn alloys have been assessed as a function of ...

    • Al-Cr-Ti–V Thermodynamic assessment of the ordered B2 phase 

      Wang, H.; Warnken, N.; Reed, R.C. (2013-03-29)
      Thermodynamic assessment of the ordered B2 phase in the quaternary Ti–V–Cr–Al system is carried out. A set of self-consistent thermodynamic parameters is presented. A two-sublattice model (Al,Cr,Ti,V )0.5: (Al,Cr,Ti,V )0.5 ...

    • Al-Cu-Fe Interdiffusivities and atomic mobilities 

      Cui, S.L.; Dai, C.; Du, Y.; Wang, Shaoqing; Xu, Honghui; Yin, Ming; Zhang, Feng; Zhang, L. (2013-04-01)
      Using solid/solid diffusion couples and the electron probe microanalysis (EPMA) technique, the interdiffusion coefficients in fcc Cu–Al–Fe alloys at 1273 K were determined by means of Whittle and Green’s method. Based on ...

    • Al-Cu-Y Thermodynamic description 

      Huang, G.X.; Jin, Z.P.; Liu, Libin; Luo, H.T.; Masset, P.; Tao, X.M.; Zhang, L. (2013-04-01)
      Phase equilibria in the ternary Al–Cu–Y system have been analyzed by coupling the CALPHAD method and first-principles calculations, and a complete thermodynamic description was obtained. The thermodynamic descriptions of ...

    • Al-Li-Zn Thermodynamic description 

      Guo, Cuiping; Liang, Yu; Li, Changrong; Du, Zhenmin (2013-03-29)
      The Al–Li–Zn system was critically assessed using the CALPHAD technique. The solution phases (liquid, bcc, fcc and hcp) were described by the substitutional solution model. The compounds Al2Li3 and Al4Li9 in the Al–Li ...

    • Al–Pt First-principles calculations and thermodynamic modeling 

      Kim, D.E.; Liu, Z.-K.; Manga, V.R.; Prins, S.N. (2013-03-29)
      Thermodynamic description of the Al–Pt binary system is modeled by combining first-principles calculations with the CALPHAD method. The four-sublattice and two-sublattice compound energy formalisms are used to model the ...

    • Au, Cu, Pd and Pt alloys Mobilities and diffusivities 

      Du, Y.; Liang, D.; Liu, Yajun; Wang, Jiang; Zhang, L. (2013-03-29)
      Based on the CALPHAD technique, the atomic mobilities and diffusivities in fcc Fe–X (X=Ag, Au, Cu, Pd and Pt) alloys have been critically studied. The thermodynamic descriptions and various types of diffusivities are ...

    • Au–Ga Thermodynamic assessment 

      Wang, J.; Liu, Y.J.; Liu, H.Y.; Liu, L.B.; Jin, Z.P. (2013-03-29)
      The Au–Ga binary system was assessed thermodynamically using the CALPHAD method through Thermo-calc® software based on the critical review of the available experimental data from the published literature. The solution ...

    • C-Mn Thermodynamic assessment 

      Appen, J.; Djurovic, D.; Drownskowski, R.; Hallstedt, B. (2013-03-29)
      The manganese–carbon system has been assessed by means of the CALPHAD method. There is a previous description of this system [W. Huang, Scand. J. Metall., 19 (1990) 26–32], but since then a number of high quality experimental ...

    • Co-Pt Thermodynamic modeling of fcc order/disorder transformations 

      Du, Kong; Kim, D.E.; Liu, Z.-K.; Saal, J.; Shang, Shun-Li; Zhou, L.C. (2013-04-01)
      The present work reports on a thermodynamic modeling of the Co–Pt system with ordered fcc phases of L10 and L12 structures by means of the CALPHAD method. The liquid, hcp and fcc phases have been modeled as substitutional ...

    • Co-Sm Thermodynamic modeling 

      Yuan, Yuan; Yi, JianHong; Borzone, G.; Watson, A. (2013-04-01)
      The phase diagram of the Co–Sm system has been assessed by applying the Calculation of Phase Diagram (CALPHAD) technique. Thermochemical and phase equilibrium information from the literature have been critically evaluated, ...

    • Co–Zr Thermodynamic optimization 

      Durga, A.; Kumar, K.C. (2013-03-28)
      The constitutional and thermochemical information of the Co–Zr system is modelled using the Calphad method to obtain a reliable thermodynamic description of the system. Appropriate sublattice models are chosen to describe ...

    • Cr-B-Mo Thermodynamic analysis of phase equilibria 

      Hasebe, M.; Tojo, M.; Tokunaga, T. (2013-03-29)
      A thermodynamic analysis of the phase equilibria in the Cr–Mo–B ternary system has been carried out by combining first-principles calculations with the CALPHAD approach. The thermodynamic descriptions of three binary systems ...

    • Cr-Re Ab initio and thermodynamic study 

      Kocer, C.; Murakami, H.; Onodera, H.; Palumbo, M. (2013-03-29)
      In this work the assessment of the Cr–Re system, using a combined ab initio and CALPHAD (CALculation of Phase Diagrams) approach, is presented. To model the sigma phase, a five-sublattice combined CEF model was applied and ...

    • Cu-Mn-Ni Atomic mobility, diffusivity and diffusion growth simulation 

      Chen, L.; Du, Y.; Liu, Shuhong; Xu, Honghui; Zhang, Lijun; Zhang, Weibin (2013-04-01)
      On the basis of the critically reviewed experimental diffusivities available in the literature, the atomic mobilities of Cu, Mn and Ni in fcc Cu–Mn–Ni alloys were assessed as a function of temperature and composition by ...

    • Cu-Pb-Sn Thermodynamic description 

      Docheva, P.; Vassilev, G. (2013-03-29)
      A thermodynamic description of the ternary Cu–Pb–Sn system at the Cu–Pb side is presented. The thermodynamic parameters of the sub-systems, Cu–Pb, Cu–Sn and Pb–Sn, are taken from earlier SGTE-based assessments and those ...

    • Cu-Sn-Ti Experimental investigation and thermodynamic assessment 

      Klotz, U.; Leinenbach, C.; Liu, Chunlei; Loffler, J.; Uggowitzer, P.; Wang, Jiang (2013-03-29)
      The Cu–Sn–Ti ternary system has been studied via experiments and thermodynamic modelling. In the experimental section, the composition of the alloys was selected based on the preliminary calculations and available literature ...