Based on the experimental isothermal sections at 800, 1000, 1700 and 1800 °C and the liquidus projections from both the literature and the present measurements, the ternary Nb–Si–Mo system is thermodynamically assessed ...

Based on the CALPHAD technique, the atomic mobilities and diffusivities in fcc Fe–X (X=Ag, Au, Cu, Pd and Pt) alloys have been critically studied. The thermodynamic descriptions and various types of diffusivities are ...

The thermodynamic properties and phase diagram of the RbBr–TbBr3 system were analyzed by means of the CALPHAD method in this work. Thermodynamic models were defined in order to describe the Gibbs energies of the individual ...

Phase relations in the Mg–Hg–Ga ternary system have been experimentally and thermodynamically studied. At first, the isothermal sections of the Mg–Hg–Ga system in the Mg-rich region at 673 K and 473 K were investigated by ...

The present work reports on a thermodynamic modeling of the Co–Pt system with ordered fcc phases of L10 and L12 structures by means of the CALPHAD method. The liquid, hcp and fcc phases have been modeled as substitutional ...

Using solid/solid diffusion couples and the electron probe microanalysis (EPMA) technique, the interdiffusion coefficients in fcc Cu–Al–Fe alloys at 1273 K were determined by means of Whittle and Green’s method. Based on ...

The phase diagram of the ternary Ni–Pb–Sb system was investigated experimentally by differential scanning calorimetry (DSC) and scanning electron microscopy (SEM) with energy dispersive spectrometry (EDS) methods, and ...

The Si–Sr binary system has been thermodynamically reassessed in the present work based on the critically reviewed experimental data available in the literature, especially newly published experimental phase diagram data ...

The Mn–Ni–Si system has been investigated via thermodynamic modeling coupled with key experiments. The isothermal section at 1000 °C of the Mn–Ni–Si system was determined by means of XRD and SEM/EDX. Based on the critically ...

Phase equilibria in the ternary Al–Cu–Y system have been analyzed by coupling the CALPHAD method and first-principles calculations, and a complete thermodynamic description was obtained. The thermodynamic descriptions of ...