Browsing Mechanical Properties by Issue Date
Now showing items 1-7 of 7
-
The composite piezoelectric oscillator is employed to measure the adiabatic elastic moduli of crystalline aluminum over the temperature interval 63°K to 773°K.
(1953-04-28)The composite piezoelectric oscillator is employed to measure the adiabatic elastic moduli of crystalline aluminum over the temperature interval 63'K to 773 K. The data permit a valid extrapolation to O'K. The Debye ... -
Temperature Variation of the Elastic Constants of Cubic Elements. I. Copper
(1954-09-08)The ultrasonic pulse technique has been used in conjunction with a specially devised cryogenic technique to measure the velocities of 10-Mc/sec acoustic waves in copper single crystals in the range from 4.2°K to 300°K. The ... -
The High Temperature Elastic Moduli of Aluminum
(1968-11-04)Measurements of the elastic moduli of aluminum over the temperature range 300°–930°K are reported. These data together with those reported for T < 300°K, show that all elastic moduli, including the shear moduli, vary ... -
Temperature Dependece of the Elastic Constants of Aluminum
(1979-03-02)The single crystal elastic constants of aluminum have been measured using a piezoelectric composite oscillator from room temperature to just 20K below the melting point. The elastic moduli differ markedly from previous ... -
Spherical nanoindentation stress-strain curves of commercially pure titanium and Ti-6Al-4V
Spherical nanoindentation combined with electron back-scattered diffraction was employed to characterize the grain-scale elastic and plastic anisotropy of single crystal alpha-Ti for commercially pure (CP-Ti) and alloyed ... -
Spherical nanoindentation stress-strain curves of primary-α grains in Ti5-2.5, Ti811, Ti64, Ti6242 and Ti6246 alloys
Recently established spherical indentation stress-strain protocols have demonstrated the feasibility of measuring reliably the mechanical responses at different material structure length scales in a broad range of structural ... -
Use of spherical nanoindentation protocols to study the anisotropic mechanical response of alpha-beta single colonies in Ti-6Al-4V alloy
The recently developed spherical nanoindentation stress-strain protocols were employed in this study to investigate systematically the anisotropic elastic and yield response of the α-β single colonies in a Ti-6Al-4V alloy. ...