Browsing ASM Structural Materials Data Demonstration Project by Title

Now showing items 42-61 of 80

    • Machining of Al 

      Unknown author (2013-12-03)

    • Mechanical Properties Data for Selected Aluminum Alloys, 

      Alan F. Liu (2013-12-03)
      Limited mechanical properties data for several selected aluminum alloys are compiled in this appendix. Relatively new aluminum alloys included are 7033, Al-Li 8090 and 2090, rapidly solidified power metallurgy (P/M) aluminum, ...

    • Mechanical Properties p162-169 

      Unknown author (2013-12-03)

    • Metal-Matrix Composites 

      John V. Foltz; Charles M. Blackmon (2013-12-03)
      METAL-MATRIX COMPOSITES (MMCs) are a class of materials with potential for a wide variety of structural and thermal management applications. Metal-matrix composites are capable of providing higher-temperature operating ...

    • Metallurgical Considerations in Fracture Resistance 

      J. Gilbert Kaufman (2013-12-03)
      The application of toughness testing to alloy development has led to a number of high-strength aluminum alloys and special tempers of some alloys with outstanding combinations of strength and toughness. An underlying basis ...

    • Metallurgical Principles 

      Martin Bauser (2013-12-03)
      The extensive use of metals over thousands of years, but in particular during the industrial age, can be attributed to their specific properties. In addition to their good electrical conductivityãassociated with good ...

    • Metallurgy of Heat Treatment and General Principles of Precipitation 

      J E Hatch (2013-12-03)
      The heat treatable alloys contain amounts of soluble alloying elements that exceed the equilibrium solid solubility limit at room and moderately higher temperatures. The amount present may be less or more than the maximum ...

    • Metastable Phases in an Al-Mg-Si Alloy Containing Copper 

      Kenji Matsuda; Yasuhiro Uetani; Tatsuo Sato; Susumu Ikeno (2013-12-03)
      Alloy studied a lab sample with 0.5pct Cu mass content. The Q’phase in an Al-1.0 mass pct Mg2Si-0.5 mass pct Cu alloy at a peak-aged condition of 523 K was observed by a high-resolution transmission electron microscope ...

    • Mg Self-Diffusion 

      Combronde, J.; Brebec, G. (2013-08-09)
      The self-diffusion of magnesium along the c-axis and perpendicular to it has been investigated in the temperature range from 500 to 630 C.

    • Mg Self-Diffusion 

      Shewmon, P. G.; Rhines, F. N. (2013-08-09)
      The determination of the self-diffusion coefficient of magnesium has been made possible recently by discovery of a radioactive isotope, Mg-28 having a half-life of 21.3 hr, and subject to manufacture in useful quantity.

    • Mg-Al Interdiffusion and Phase Growth Kinetics 

      Kulkarni, Kaustubh N.; Luo, Alan A. (2013-05-07)
      Binary interdiffusion data as functions of composition in the Mg-Al system are essential in modeling kinetics of phase transformations in multicomponent Mg and Al alloys. Interdiffusion and phase growth kinetics were studied ...

    • Microstructural Development and Mechanical Properties of Interrupted Aged Al-Mg-Si-Cu Alloy 

      J. Buha; R.N. Lumley; A.G. Crosky (2013-12-03)
      The effects of a recently developed interrupted aging procedure on the microstructural development and mechanical properties of the commercial Al-Mg-Si-Cu alloy 6061 have been studied using transmission electron microscopy ...

    • Microstructure of Alloys 

      J E Hatch (2013-12-03)
      The examination of microstructure is one of the principal means of evaluating alloys and products to determine the effects of various fabrication and thermal treatments, evaluate the effects of new procedures, and analyze ...

    • Modeling and Simulation of the Forming of Aluminum Sheet Alloys 

      J.W. Yoon, F. Barlat (2013-12-03)
      WITH ADVANCES in computer hardware and software, it is possible to model material processing, product manufacturing, product performance in service, and failure. Although the fine-tuning of product manufacturing and ...

    • Modeling the Influence of Cooling Rate on the Precipitate Evolution in Al-Mg-Si (Cu) Alloys 

      P. Lang; A. Falahati; M.R. Ahmadi; P. Warczok; E. Povoden-Karadeniz; E. Kozeschnik; R. Radis (2013-12-03)
      The present study aims at understanding the process of age hardening in Al-Mg-Si (Cu) alloys, which starts immediately after annealing heat treatment followed by quenching. The cooling rate turns out to be one of the most ...

    • Models for Fracture during Deformation Processing 

      H. Kuhn (2013-12-03)
      In very broad terms, modeling of fracture during deformation processes has been a major focal point for production engineers since cracking first occurred as a source of scrap in manufacturing. G. Sachs, in his 1954 ...

    • Phase Diagram Calculations in Teaching, Research, and Industry 

      Y. Austin Chang (2013-12-03)
      2003 Edward DeMille Campbell Memorial Lecture ASM International presents an overview, undoubtedly a personal one, on the impact of Phase Diagram Calculations on Teaching, Research and Industrial 12 instances of 6061.

    • The Production of Extruded Semifinished Products from Metallic Materials, 

      Unknown author (2013-12-03)
      Aluminum alloys are covered on pages 207 -239 The hot-working process extrusion is covered for a wide selection of metals with varying degrees of extrudability. This is the translation of a German book, so  6061 appears ...

    • Properties of Wrought Aluminum and Aluminum Alloys 

      ASM International (2013-12-03)
      Properties of specific wrought alloy alloys are presented in a structured format. Includes specifications, composition, applications, physical and mechanical properties, and fabrication characteristics. 6061 in one section.

    • Quantitative Characterization and Representation of Global Microstructural Geometry 

      Arun M. Gokhale (2013-12-03)
      It is the central precept of materials science that processing governs microstructure and the microstructure influences the properties and performance of materials. Consequently, quantitative characterization and mathematical ...