ASM Structural Materials Data Demonstration Project: Recent submissions
Now showing items 1-20 of 80
-
Tensile and Microindentation Stress-Strain Curves of Al-6061
Recent spherical microindentation stress-strain protocols were developed and validated on Al-6061 (DOI: 10.1186/s40192-016-0054-3). The scaling factor between the uniaxial yield strength and the indentation yield strength ... -
Additional properties of Aluminum Alloy 6061
(2014-04-03)Spreadsheet with typical and minimum properties of wrought Al alloy 6061. Included fatigue, fracture and creep properties. -
Tracer Diffusion of Magnesium in Aluminum Single Crystals
(2014-02-16) -
Study of Si self-diffusion by nuclear techniques
(2014-02-10)By using ion implantation for preparation and p, γ-reactions for analysis of 30Si profiles the Si self-diffusion has been studied in the temperature range of 830–1200°C. The results reveal unambiguously that the diffusion ... -
Enhancement of strength and superplasticity in a 6061 Al alloy processed by equal-channel-angular-pressing
(2013-12-03)Pre-equal-channel-angular-pressing (ECAP) solution treatment combined with post-ECAP aging treatment has been found to be effective in enhancing the room-temperature strength of 6061 aluminum alloy. The largest increase ... -
Aluminum-Magnesium-Silicon Ternary Alloy Phase Diagram
(2013-12-03)Ternary isothermal diagram ( 427°C), crystal data, melting points. -
Forging of Discontinuously Reinforced Aluminum Composites
(2013-12-03)DISCONTINUOUSLY REINFORCED aluminum (DRA) alloy metal-matrix composites (MMCs) represent an advanced aluminum materials concept whereby ceramic particles, or whiskers, are added to aluminum-base alloys through the use of ... -
Friction and Wear of Aluminum-Silicon Alloy
(2013-12-03)ALUMINUM-SILICON ALLOYS are noted for their unique combination of desirable characteristics, including excellent castability and low density combined with good mechanical properties. One reference to 6061. -
Forging of Aluminum Alloys
(2013-12-03)ALUMINUM ALLOYS are forged into a variety of shapes and types of forgings with a broad range of final part forging design criteria based on the intended application. Aluminum alloy forgings, particularly closed-die forgings, ... -
Anodizing
(2013-12-03)IN GENERAL, anodizing refers to conversion coating of the surface of aluminum and its alloys to porous aluminum oxide. The process derives its name from the fact that the aluminum part to be coated becomes the anode in an ... -
Surface Engineering of Aluminum and Aluminum Alloys
(2013-12-03)ALUMINUM OR ALUMINUM ALLOY products often have various types of finishes applied to their surfaces to enhance appearance or improve functional properties. This article discusses the methods employed in the cleaning, ... -
The achievement of high strength in an Al 6061 alloy by the application of cryogenic and warm rolling
(2013-12-03)The ultrafine-grained Al 6061 alloy, which was fabricated by the combination of cryogenic rolling with warm rolling, achieved high ultimate tensile strength of 420 MPa. Compared with the results by other severe plastic ... -
Phase Diagram Calculations in Teaching, Research, and Industry
(2013-12-03)2003 Edward DeMille Campbell Memorial Lecture ASM International presents an overview, undoubtedly a personal one, on the impact of Phase Diagram Calculations on Teaching, Research and Industrial 12 instances of 6061. -
The development of hardness homogeneity in aluminum and an aluminum alloy processed by ECAP
(2013-12-03)Equal-channel angular pressing (ECAP) is an effective fabrication process for obtaining ultrafine-grained materials. This paper examines the development of homogeneity in materials processed by ECAP with emphasis on samples ... -
Wrought aluminum truss core sandwich structures
(2013-12-03)Wrought metallic sandwich structures with open cell truss cores are a relatively new class of multifunctional material systems that can be made using affordable deformation, assembly, and joining processes. Here, the design ... -
Evaluation of mechanical properties of porous 6061 alloys fabricated by the powder compression and induction heating process
(2013-12-03)The purpose of this study is to evaluate the mechanical properties of 6061 Al foam products, which were fabricated by the powder compression and multistep induction heating method, and to build the database necessary for ... -
Modeling the Influence of Cooling Rate on the Precipitate Evolution in Al-Mg-Si (Cu) Alloys
(2013-12-03)The present study aims at understanding the process of age hardening in Al-Mg-Si (Cu) alloys, which starts immediately after annealing heat treatment followed by quenching. The cooling rate turns out to be one of the most ... -
Microstructural Development and Mechanical Properties of Interrupted Aged Al-Mg-Si-Cu Alloy
(2013-12-03)The effects of a recently developed interrupted aging procedure on the microstructural development and mechanical properties of the commercial Al-Mg-Si-Cu alloy 6061 have been studied using transmission electron microscopy ... -
Metastable Phases in an Al-Mg-Si Alloy Containing Copper
(2013-12-03)Alloy studied a lab sample with 0.5pct Cu mass content. The Q’phase in an Al-1.0 mass pct Mg2Si-0.5 mass pct Cu alloy at a peak-aged condition of 523 K was observed by a high-resolution transmission electron microscope ... -
The corrosion of 6061 aluminum under heat transfer conditions in the ANS corrosion test loop,
(2013-12-03)The corrosion of aluminum alloy fuel cladding in ultrahigh flux research reactors such as the Advanced Neutron Source may pose special temperature and structural problems associated with the buildup of reaction products ...