Browsing 6061 Aluminum Alloys: Handbooks, Journal Articles, and Technical Papers by Title
Now showing items 29-48 of 56
-
The Influence of Alloy Composition on Precipitates of the Al-Mg-Si System
(2013-12-03)To study how changes in solute elements affect precipitation, six Al-Mg-Si alloys aged at 175 ° C were investigated by transmission electron microscopy (TEM). In alloys with 1.3 at. pct solute, when the Si/Mg ratio exceeds ... -
Introduction
(2013-12-03)The test methods and criteria used to evaluate the fracture characteristics of aluminum alloys are reviewed, and a substantial amount of representative test data for individual lots of aluminum sheet, plate, forgings, ... -
Machining of Al
(2013-12-03) -
Mechanical Properties p162-169
(2013-12-03) -
Metal-Matrix Composites
(2013-12-03)METAL-MATRIX COMPOSITES (MMCs) are a class of materials with potential for a wide variety of structural and thermal management applications. Metal-matrix composites are capable of providing higher-temperature operating ... -
Metallurgical Considerations in Fracture Resistance
(2013-12-03)The application of toughness testing to alloy development has led to a number of high-strength aluminum alloys and special tempers of some alloys with outstanding combinations of strength and toughness. An underlying basis ... -
Metallurgical Principles
(2013-12-03)The extensive use of metals over thousands of years, but in particular during the industrial age, can be attributed to their specific properties. In addition to their good electrical conductivityãassociated with good ... -
Metallurgy of Heat Treatment and General Principles of Precipitation
(2013-12-03)The heat treatable alloys contain amounts of soluble alloying elements that exceed the equilibrium solid solubility limit at room and moderately higher temperatures. The amount present may be less or more than the maximum ... -
Microstructure of Alloys
(2013-12-03)The examination of microstructure is one of the principal means of evaluating alloys and products to determine the effects of various fabrication and thermal treatments, evaluate the effects of new procedures, and analyze ... -
Modeling and Simulation of the Forming of Aluminum Sheet Alloys
(2013-12-03)WITH ADVANCES in computer hardware and software, it is possible to model material processing, product manufacturing, product performance in service, and failure. Although the fine-tuning of product manufacturing and ... -
Modeling the Influence of Cooling Rate on the Precipitate Evolution in Al-Mg-Si (Cu) Alloys
(2013-12-03)The present study aims at understanding the process of age hardening in Al-Mg-Si (Cu) alloys, which starts immediately after annealing heat treatment followed by quenching. The cooling rate turns out to be one of the most ... -
Models for Fracture during Deformation Processing
(2013-12-03)In very broad terms, modeling of fracture during deformation processes has been a major focal point for production engineers since cracking first occurred as a source of scrap in manufacturing. G. Sachs, in his 1954 ... -
The Production of Extruded Semifinished Products from Metallic Materials,
(2013-12-03)Aluminum alloys are covered on pages 207 -239 The hot-working process extrusion is covered for a wide selection of metals with varying degrees of extrudability. This is the translation of a German book, so  6061 appears ... -
Quantitative Characterization and Representation of Global Microstructural Geometry
(2013-12-03)It is the central precept of materials science that processing governs microstructure and the microstructure influences the properties and performance of materials. Consequently, quantitative characterization and mathematical ... -
Recrystallization of an AlMgSi alloy after different modes of hot deformation
(2013-12-03)Recrystallization of an AlMgSi alloy has been studied after deformation in torsion and plane strain compression. The main emphasis has been focused on describing the development of nuclei in shear deformed material, and a ... -
Rotary Forging
(2013-12-03)ROTARY FORGING, or orbital forging, is a two-die forging process that deforms only a small portion of the workpiece at a time in a continuous manner. Unfortunately, the term rotary forging is sometimes used to describe the ... -
Selecting Aluminum Alloys to Resist Failure by Fracture Mechanisms
(2013-12-03)Though virtually all design and standard specifications require the definition of tensile properties for a material, these data are only partly indicative of mechanical resistance to failure in service. Except for those ... -
Structure, Properties and Application of Alloys of the Al _ Mg _ Si _ (Cu) System
(2013-12-03)A brief review of the reports of ICAA12 devoted to high-technology weldable alloys of the Al _ Si _ Mg systemis presented. Five occurrences of 6061. -
Superplastic behavior and cavitation in high-strain-rate superplastic Si3N4p /Al-Mg-Si composites,
(2013-12-03)High-strain-rate superplastic behavior has been investigated for Si3N4p/Al-Mg-Si (6061) composites with a V f=20 and 30 pct, respectively, where V f is the volume fraction of reinforcements. A maximum elongation was attained ... -
Surface Engineering of Aluminum and Aluminum Alloys
(2013-12-03)ALUMINUM OR ALUMINUM ALLOY products often have various types of finishes applied to their surfaces to enhance appearance or improve functional properties. This article discusses the methods employed in the cleaning, ...