Browsing CALPHAD Assessments by Subject "File Repository Categories::Phases::Intermetallics"
Now showing items 120 of 33

AgAl Functional Description
(20130131)The energy expressions for GP zones in the Al–Ag binary system, including the εstate and the ηstate ones, are established by combining the essential Gibbs energy for the matrix alloy with the interfacial energy and the ... 
AlCrTi–V Thermodynamic assessment of the ordered B2 phase
(20130329)Thermodynamic assessment of the ordered B2 phase in the quaternary Ti–V–Cr–Al system is carried out. A set of selfconsistent thermodynamic parameters is presented. A twosublattice model (Al,Cr,Ti,V )0.5: (Al,Cr,Ti,V )0.5 ... 
AlCuY Thermodynamic description
(20130401)Phase equilibria in the ternary Al–Cu–Y system have been analyzed by coupling the CALPHAD method and firstprinciples calculations, and a complete thermodynamic description was obtained. The thermodynamic descriptions of ... 
AlLiZn Thermodynamic description
(20130329)The Al–Li–Zn system was critically assessed using the CALPHAD technique. The solution phases (liquid, bcc, fcc and hcp) were described by the substitutional solution model. The compounds Al2Li3 and Al4Li9 in the Al–Li ... 
Alkali metals thermodynamic assessments of six binary systems
(20130330)Among the phase diagrams of six binary systems composed of alkali metals, Sodium (Na), Potassium (K), Rubidium (Rb) and Cesium (Cs), three of them, those of the Cs–K, Cs–Rb and K–Rb systems, indicate a complete range of ... 
Al–Pt Firstprinciples calculations and thermodynamic modeling
(20130329)Thermodynamic description of the Al–Pt binary system is modeled by combining firstprinciples calculations with the CALPHAD method. The foursublattice and twosublattice compound energy formalisms are used to model the ... 
Au–Ga Thermodynamic assessment
(20130329)The Au–Ga binary system was assessed thermodynamically using the CALPHAD method through Thermocalc® software based on the critical review of the available experimental data from the published literature. The solution ... 
Bi–Lu and Lu–Sb Thermodynamic assessments
(20130401)The phase diagrams and thermodynamic properties in the Bi–Lu and Lu–Sb binary systems have been assessed by using the CALPHAD (Calculation of Phase Diagrams) method on the basis of experimental data including the thermodynamic ... 
CMn Thermodynamic assessment
(20130329)The manganese–carbon system has been assessed by means of the CALPHAD method. There is a previous description of this system [W. Huang, Scand. J. Metall., 19 (1990) 26–32], but since then a number of high quality experimental ... 
CoPt Thermodynamic modeling of fcc order/disorder transformations
(20130401)The present work reports on a thermodynamic modeling of the Co–Pt system with ordered fcc phases of L10 and L12 structures by means of the CALPHAD method. The liquid, hcp and fcc phases have been modeled as substitutional ... 
Co–Zr Thermodynamic optimization
(20130328)The constitutional and thermochemical information of the Co–Zr system is modelled using the Calphad method to obtain a reliable thermodynamic description of the system. Appropriate sublattice models are chosen to describe ... 
CrBMo Thermodynamic analysis of phase equilibria
(20130329)A thermodynamic analysis of the phase equilibria in the Cr–Mo–B ternary system has been carried out by combining firstprinciples calculations with the CALPHAD approach. The thermodynamic descriptions of three binary systems ... 
CrRe Ab initio and thermodynamic study
(20130329)In this work the assessment of the Cr–Re system, using a combined ab initio and CALPHAD (CALculation of Phase Diagrams) approach, is presented. To model the sigma phase, a fivesublattice combined CEF model was applied and ... 
Cr–Ge Thermodynamic description
(20130328)he Cr–Ge binary system was thermodynamically optimized using the CALPHAD method. The liquid phase was described by means of an associate solution model. The BCC terminal solid solution was described by the substitutional ... 
Cs–In Thermodynamic Modeling
(20130328)Thermodynamic description of the Cs–In system has been developed by the CALPHAD modeling combined with firstprinciples calculations. The calculated phase diagram of the Cs–In system is compared with the experimental one ... 
CuSnTi Experimental investigation and thermodynamic assessment
(20130329)The Cu–Sn–Ti ternary system has been studied via experiments and thermodynamic modelling. In the experimental section, the composition of the alloys was selected based on the preliminary calculations and available literature ... 
Cu–Pb–Zn Thermodynamic description
(20130329)Thermodynamic description of the ternary Cu–Pb–Zn system is presented. The adjustable parameters of the subsystems, Cu–Pb, Cu–Zn and Pb–Zn, are taken from earlier SGTEbased assessments and those of the ternary system are ... 
Cu–Si–Zn and Cu–Zn Experimental investigation and thermodynamic modeling
(20130330)The isothermal section of the Cu–Si–Zn ternary system at 600 °C was experimentally determined with fifteen alloys by means of optical microscopy, Xray diffraction, and the scanning electron microscopy with energy dispersive ... 
FeSiZn Experimental investigation and thermodynamic reassessment
(20130329)Based on the critical evaluation of the experimental data available in the literature, the isothermal section of the Fe–Si–Zn system at 873 K was measured using a combination of Xray analysis and scanning electron microscopy ... 
Gd–Mg–Sm Thermodynamic Description
(20130328)The Mg–Sm, Gd–Sm and Gd–Mg–Sm systems were thermodynamically optimized using the CALPHAD technique. The solution phases, liquid, bcc, hcp and rhombohedral, were described by the substitutional solution model. The isostructural ...