Search
Now showing items 1-10 of 31
Al-Li-Zn Thermodynamic description
(2013-03-29)
The Al–Li–Zn system was critically assessed using the CALPHAD technique. The solution phases (liquid, bcc, fcc and hcp) were described by the substitutional solution model. The compounds Al2Li3 and Al4Li9 in the Al–Li ...
Co-Sm Thermodynamic modeling
(2013-04-01)
The phase diagram of the Co–Sm system has been assessed by applying the Calculation of Phase Diagram (CALPHAD) technique. Thermochemical and phase equilibrium information from the literature have been critically evaluated, ...
Gd–Mg–Sm Thermodynamic Description
(2013-03-28)
The Mg–Sm, Gd–Sm and Gd–Mg–Sm systems were thermodynamically optimized using the CALPHAD technique. The solution phases, liquid, bcc, hcp and rhombohedral, were described by the substitutional solution model. The isostructural ...
Al-Cr-Ni Thermodynamic Re-Assessment of the Ternary System
(2013-01-31)
A re-assessment of the ternary system A1-Cr-Ni following Dupin's thesis work using a single Gibbs energy function for the gamma and gamma prime phases is presented taking into account new experimental liquidus temperatures. ...
H-Ti Thermodynamic description
(2013-03-29)
Previous thermodynamic assessments of the Ti–H system are reviewed, and a new evaluation is carried out by taking into account the liquid phase in the system using the associate solution model. The sublattice model is ...
Cr-B-Mo Thermodynamic analysis of phase equilibria
(2013-03-29)
A thermodynamic analysis of the phase equilibria in the Cr–Mo–B ternary system has been carried out by combining first-principles calculations with the CALPHAD approach. The thermodynamic descriptions of three binary systems ...
Co–Zr Thermodynamic optimization
(2013-03-28)
The constitutional and thermochemical information of the Co–Zr system is modelled using the Calphad method to obtain a reliable thermodynamic description of the system. Appropriate sublattice models are chosen to describe ...
Cu–Si–Zn and Cu–Zn Experimental investigation and thermodynamic modeling
(2013-03-30)
The isothermal section of the Cu–Si–Zn ternary system at 600 °C was experimentally determined with fifteen alloys by means of optical microscopy, X-ray diffraction, and the scanning electron microscopy with energy dispersive ...
Fe-Si-Zn Experimental investigation and thermodynamic reassessment
(2013-03-29)
Based on the critical evaluation of the experimental data available in the literature, the isothermal section of the Fe–Si–Zn system at 873 K was measured using a combination of X-ray analysis and scanning electron microscopy ...
In–Eu and In–Yb Thermodynamic assessments
(2013-07-08)
Based on the experimental data including thermodynamic properties and phase equilibria, thermodynamic assessments of the In–Eu and In–Yb binary systems have been carried out by using the CALPHAD (Calculation of Phase ...