Search
Now showing items 1-10 of 20
Al-Li-Zn Thermodynamic description
(2013-03-29)
The Al–Li–Zn system was critically assessed using the CALPHAD technique. The solution phases (liquid, bcc, fcc and hcp) were described by the substitutional solution model. The compounds Al2Li3 and Al4Li9 in the Al–Li ...
Cr-B-Mo Thermodynamic analysis of phase equilibria
(2013-03-29)
A thermodynamic analysis of the phase equilibria in the Cr–Mo–B ternary system has been carried out by combining first-principles calculations with the CALPHAD approach. The thermodynamic descriptions of three binary systems ...
Co–Zr Thermodynamic optimization
(2013-03-28)
The constitutional and thermochemical information of the Co–Zr system is modelled using the Calphad method to obtain a reliable thermodynamic description of the system. Appropriate sublattice models are chosen to describe ...
Cu–Si–Zn and Cu–Zn Experimental investigation and thermodynamic modeling
(2013-03-30)
The isothermal section of the Cu–Si–Zn ternary system at 600 °C was experimentally determined with fifteen alloys by means of optical microscopy, X-ray diffraction, and the scanning electron microscopy with energy dispersive ...
Fe-Si-Zn Experimental investigation and thermodynamic reassessment
(2013-03-29)
Based on the critical evaluation of the experimental data available in the literature, the isothermal section of the Fe–Si–Zn system at 873 K was measured using a combination of X-ray analysis and scanning electron microscopy ...
Cu-Sn-Ti Experimental investigation and thermodynamic assessment
(2013-03-29)
The Cu–Sn–Ti ternary system has been studied via experiments and thermodynamic modelling. In the experimental section, the composition of the alloys was selected based on the preliminary calculations and available literature ...
Al-Cr-Ti–V Thermodynamic assessment of the ordered B2 phase
(2013-03-29)
Thermodynamic assessment of the ordered B2 phase in the quaternary Ti–V–Cr–Al system is carried out. A set of self-consistent thermodynamic parameters is presented. A two-sublattice model (Al,Cr,Ti,V )0.5: (Al,Cr,Ti,V )0.5 ...
Cu–Pb–Zn Thermodynamic description
(2013-03-29)
Thermodynamic description of the ternary Cu–Pb–Zn system is presented. The adjustable parameters of the sub-systems, Cu–Pb, Cu–Zn and Pb–Zn, are taken from earlier SGTE-based assessments and those of the ternary system are ...
C-Mn Thermodynamic assessment
(2013-03-29)
The manganese–carbon system has been assessed by means of the CALPHAD method. There is a previous description of this system [W. Huang, Scand. J. Metall., 19 (1990) 26–32], but since then a number of high quality experimental ...
Li–O Thermodynamic assessment
(2013-03-30)
The Li–O system has been investigated by means of the CALPHAD approach. The phase equilibria and thermodynamic data of this system are critically reviewed and assessed. The liquid phase and two stable lithium oxides, Li2O ...