Search
Now showing items 1-10 of 19
Al-Li-Zn Thermodynamic description
(2013-03-29)
The Al–Li–Zn system was critically assessed using the CALPHAD technique. The solution phases (liquid, bcc, fcc and hcp) were described by the substitutional solution model. The compounds Al2Li3 and Al4Li9 in the Al–Li ...
Co-Sm Thermodynamic modeling
(2013-04-01)
The phase diagram of the Co–Sm system has been assessed by applying the Calculation of Phase Diagram (CALPHAD) technique. Thermochemical and phase equilibrium information from the literature have been critically evaluated, ...
Co–Zr Thermodynamic optimization
(2013-03-28)
The constitutional and thermochemical information of the Co–Zr system is modelled using the Calphad method to obtain a reliable thermodynamic description of the system. Appropriate sublattice models are chosen to describe ...
Cu–Si–Zn and Cu–Zn Experimental investigation and thermodynamic modeling
(2013-03-30)
The isothermal section of the Cu–Si–Zn ternary system at 600 °C was experimentally determined with fifteen alloys by means of optical microscopy, X-ray diffraction, and the scanning electron microscopy with energy dispersive ...
Fe-Si-Zn Experimental investigation and thermodynamic reassessment
(2013-03-29)
Based on the critical evaluation of the experimental data available in the literature, the isothermal section of the Fe–Si–Zn system at 873 K was measured using a combination of X-ray analysis and scanning electron microscopy ...
Cu-Sn-Ti Experimental investigation and thermodynamic assessment
(2013-03-29)
The Cu–Sn–Ti ternary system has been studied via experiments and thermodynamic modelling. In the experimental section, the composition of the alloys was selected based on the preliminary calculations and available literature ...
Al-Cr-Ti–V Thermodynamic assessment of the ordered B2 phase
(2013-03-29)
Thermodynamic assessment of the ordered B2 phase in the quaternary Ti–V–Cr–Al system is carried out. A set of self-consistent thermodynamic parameters is presented. A two-sublattice model (Al,Cr,Ti,V )0.5: (Al,Cr,Ti,V )0.5 ...
V-Zn Experimental results and thermodynamic assessment
(2013-04-01)
Experimental investigation followed by thermodynamic assessment of the V–Zn system was carried out in the present study. A series of V–Zn alloys annealed at various temperatures were examined using scanning electron ...
Bi–Lu and Lu–Sb Thermodynamic assessments
(2013-04-01)
The phase diagrams and thermodynamic properties in the Bi–Lu and Lu–Sb binary systems have been assessed by using the CALPHAD (Calculation of Phase Diagrams) method on the basis of experimental data including the thermodynamic ...
Cu–Pb–Zn Thermodynamic description
(2013-03-29)
Thermodynamic description of the ternary Cu–Pb–Zn system is presented. The adjustable parameters of the sub-systems, Cu–Pb, Cu–Zn and Pb–Zn, are taken from earlier SGTE-based assessments and those of the ternary system are ...