Browsing Experimental Data Repository by Title
Now showing items 20-39 of 64
-
High-throughput Diffraction and Spectroscopic Data for Fe-Cr-Al Oxidation Studies
(2015-06-28)The data set was used to evaluate a Fe-Cr-Al thin film samples in a narrow composition region centered on known bulk compositions. The data are composed of two individual studies. The first set of data is a low temperature ... -
HMX microstructural data of beta, delta, and beta-reversion
X-ray computed tomography of large HMX crystals, and scanning electron microscopy of focused ion beam milled/polished small HMX crystals of varying solid phases. -
In-Situ High-Throughput Synchrotron Diffraction Data of Multiple Principle Component Alloy Thin Films
(2016-08-05)This data set is composed of a set of labeled synchrotron diffraction data taken at beamline 1-5 at SLAC on (Al1−x−yCuxMoy)FeNiTiVZr composition spread samples. The data were taken to test the relative importance of ... -
Initial Screening of Environmentally Sustainable Surface Pretreatments for Adhesive Bonding Applications
(2017)A methacrylate adhesive marketed for high temperature applications was screened in combination with environmentally sustainable TT-C-490F surface pretreatments. Testing consisted of single-lap-joint testing using aluminum ... -
Interdiffusion in the Mg-Al System and Intrinsic Diffusion in beta-Mg2Al3
(2013-05-07)Solid-to-solid diffusion couples were assembled and annealed to examine the diffusion between pure Mg (99.96 pct) and Al (99.999 pct). Diffusion anneals were carried out at 573 K, 623 K and 673 K (300 C, 350 C and 400 C) ... -
Interrelationship between the Diffusion Behaviour and the phase Transformation Characteristics
(2013-07-03)It has been observed that the metals which exhibit anomalous diffusion behaviour are all allotropic in nature. A hypothesis to rationalise this interrationship between the diffusion behaviour and the phase transformation ... -
Lattice Parameters, Densities, Expansion Coefficients and Perfection of Structure of Cu and Cu-In alpha Phase
(1969-04-08)Spectroscopically pure Cu has a lattice parameter a25 = 3.61491 Å (corrected for refraction), and a thermal expansion coefficient [alpha] = 14.87 × 10-6°C-1 between 15 and 55°C. The measured density d25 is 8.9314 ± 0.0002 ... -
Materials Informatics Approach to Material Extrusion Additive Manufacturing
Processing-structure-property relationships in material extrusion additive manufacturing are complex, non-linear, and poorly understood. In this work, we designed an informatics workflow for the collection of high pedigree ... -
Measurement of Equilibrium Concentrations of Vacancies in Copper
(2014-07-02)The net added fraction of thermally-generated atomic sites, ΔNN, has been measured, during equilibrium heating to near the melting point, in a coarse-grained copper bar of 99.999% purity. The linear thermal expansion, ΔLL, ... -
Measurment of Equilibrium Concentrations in Aluminum
(1959-07-31)Measurements of change in length and change in lattice parameter were made at identical temperatures on 99.995% aluminum in the temperature range 229 to 656°C. Length changes, ΔL, were measured on an unconstrained horizontal ... -
Mg Self-Diffusion
(2013-08-09)The self-diffusion of magnesium along the c-axis and perpendicular to it has been investigated in the temperature range from 500 to 630 C. -
Mg Self-Diffusion
(2013-08-09)The determination of the self-diffusion coefficient of magnesium has been made possible recently by discovery of a radioactive isotope, Mg-28 having a half-life of 21.3 hr, and subject to manufacture in useful quantity. -
Mg Self-Diffusion Pavlinov 1968
(2013-08-29)It is found that the parameters of self-diffusion and carbon diffusion in calcium are in good agreement with the general regularities for self-diffusion in pure metals and interstitial impurity diffusion in metals with a ... -
Mg-Al Interdiffusion and Phase Growth Kinetics
(2013-05-07)Binary interdiffusion data as functions of composition in the Mg-Al system are essential in modeling kinetics of phase transformations in multicomponent Mg and Al alloys. Interdiffusion and phase growth kinetics were studied ... -
Multivariate Analysis of High Through-Put Adhesively Bonded Single Lap Joints: Experimental and Work Flow Protocols - Analysis results
(2016-03-24)Formatted categorical and numerical variables for multivariate analysis -
Multivariate Analysis of High Through-Put Adhesively Bonded Single Lap Joints: Experimental and Work Flow Protocols - Failure surface images
(2016-03-23)Mode-of-failure images and surveys, 300 dots per inch (dpi) resolution, Tagged Image File Format (TIFF) -
Multivariate Analysis of High Through-Put Adhesively Bonded Single Lap Joints: Experimental and Work Flow Protocols - Load vs. displacement data
(2016-03-24)Raw and analyzed load versus displacement data, including semi-automated routines for maximum strength, displacement, and area under the curve -
Multivariate Analysis of High Through-Put Adhesively Bonded Single Lap Joints: Experimental and Work Flow Protocols - Supplementary data
(2016-03-24)Supporting technical data sheets, MSDS, surface pretreatment and bonding processes, travel sheets, and mode-of-failure surveys -
Multivariate Analysis of High Through-Put Adhesively Bonded Single Lap Joints: Experimental and Work Flow Protocols – Constitutive mechanical properties
(2018-05-31)Tensile stress-strain mechanical test results and analysis for the adhesives and aluminum adherend. -
Multivariate Analysis of High Through-Put Adhesively Bonded Single Lap Joints: Experimental and Workflow Protocols - Full report
(2016-06-07)An adhesively bonded single lap joint was used to study the effects of coupon thickness, bondline thickness, surface preparation, presence of an overflow fillet, and adhesive type. Gains in the Education of Mathematics and ...